• Chassis:
• High loads and long service life through torsion-resistant chassis and low dead weight of spreader
• Easy height adjustment of the drawbar eye through height-adjustable drawbar for high drawbar
• High driving comfort and very high load capability through spring-loaded drawbar
• Later change from high to low drawbar possible
• Bogie:
• Tandem pendulum suspension unit with four maintenance-free parabolic springs
• No material deposits on the axles through standard axle cover
• Low ground disturbance also at high payloads through tyres up to 800/45 R26.5
• Low crop disturbance, low tyre wear and easy towing through optional follow-up steering
• Brake system:
• Safe driving, operational safety and high ease of use through standard dual-circuit air brake system
• PTO shaft:
• Wide-angle PTO shaft as standard equipment for overload protection for tractor and spreader
• High ease of use
• Body:
• Easy, unloading without clogging, resulting in a good spread quality through conical all-steel bin
• Side walls are fully welded to the floor for exceptional stability
• Scraper floor with low power demand and no material accumulation in front of the spreader unit through conical body design
• Drive train:
• Minimum wear through 1-piece shaft without spring pins and holes
• Overrunning clutch as standard equipment
• Scraper floor:
• Long durability and high reserves through four strong round-link steel chains with specially hardened ends
• No chain skipping due to large engagement depth of chain links in the chain sprockets (approx. 95 %)
• No drive pin skew through paired chain elongation
• Safe material transport through hot-rolled U-profile flights with good traction
• Bolted flights (U-profile) for easy replacement if worn or damaged through foreign objects – no cutting and welding required
• Optimum flow control and quick emptying, easy reversing and even material feed to the spreader unit through hydraulic scraper floor drive with spur gearbox for excellent longitudinal and lateral distribution
• Rugged scraper floor drive with 60 mm diameter feed shaft
• Low-maintenance through automatic, chain tensioners visible from tractor
• Convenient chain tension readjustment from the front of the spreader
• Easy cleaning and maintenance of the scraper floor through large maintenance hood on the front wall
• Convenient observation of the scraper floor through viewing window
• Spreader unit:
• Universally usable milling unit with dosing wall for all materials
• 1,500 mm passage height allows high throughput
• Very good separation of the spreading material through screwed, highly wear-resistant double tines in a V-pattern for perfect growth
• High throughput rates, short tooling times and low costs at low power requirement through screwed double tines
• Quiet, even operation through spring-loaded chain tensioner
• Flange bearings can be relubricated for long service life
• Low maintenance and wear through rugged, high-load drive
• Exact spreading and high throughput rates through disk spreader unit with two disks (diameter 1,000 mm)
• Extensive protection from overload and breakage through overload protection device for all spreader blades on the spreader disks
• Effective overload protection of gearboxes and shafts through two cam clutches between transfer case and disk gearbox
• Spreader hood:
• Safety, cleanliness and high ease of use through hydraulic folding
• Spreader hood interior is plastic-lined as standard equipment for better distribution of the material onto the disks and reduction of damage from stones
• Lower pendulum flap secured against foreign objects
• A wide range of optional extras allows optimum adaptation to user requirements
• Easy setting of the spreader by using the BERGMANN Setting app for spreader setting charts

• Chassis:
• V-frame made of 300 mm U-profile
• Mechanical spring-loaded drawbar for high drawbar
• Jost jack stand with two speeds
• Axle cover
• Bogie:
• 2 rigid braking axles, cross-section 130 x 130 mm
• Tandem chassis with parabolic suspension and swing compensation
• Axle track width 1,900 mm
• 10-hole wheel connection
• Brake:
• Dual-circuit air brake system with ALB regulator
• Body:
• Load volume 17 m³
• Bridge dimensions inside 5,900 x 2,050 x 1,320 mm
• Conical all-steel bin
• Rigid steel side wall
• Stable scraper guards of recycled plastic
• Steel floor (4 mm thick), welded to the side walls
• Large cargo space viewing window
• Protective screen at front
• Spreader unit:
• 2-beater milling unit
• 2 horizontal milling beaters with screwed double tines in a V-pattern and made of high-strength, low-wear material
• Cam clutch to protect the milling unit
• Dosing wall
• Passage height 1,500 mm
• Hydraulically foldable spreader hood with foreign object guard on lower section and plastic inner lining
• 2 spreader disks (1,000 mm diameter each, thickness 10 mm)
• 6 adjustable spreader blades per disk, thickness 8 mm
• Reinforced main gearbox in the disk spreader unit
• Each disk gearbox is protected with a separate cam clutch
• Diameter of disk gearbox shaft stub 50 mm
• Hardox-grade spreader blades and guide plates
• Wear plates (screwable)
• Scraper floor:
• Hydraulic drive (reversible) on both sides via 2 spur gearboxes and oil motors
• Manual control valve for continuous setting of the scraper floor speed
• Automatic chain tensioner at the front
• 4 round-link steel chains (14 x 50 mm each, 25 t breaking load per chain)
• Screwed flights made of 60 x 30 x 6 mm U-profile, fitted closed at the top
• Diameter of feed shaft 60 mm
• Drive:
• Walterscheid wide-angle PTO shaft
• One-piece drive shaft
• Overrunning clutch in the drivetrain
• Separate protection for milling unit and disk spreader unit
• PTO speed 1,000 rpm
• Lighting:
• Conforming to EU directives
• Protective equipment according to German employers’ liability insurance association
• EU type approval (CoC)

* We reserve the right to make changes to dimensions, weights and technical data. Dimensions and weights do not necessarily correspond to series versions and are not binding.