The TSW A 16 spreader body matches the body size of the TSW 5210. It can be combined with the BERGMANN VARIO 400 chassis. It is easy to mount using four proven Twistlock fasteners, like the ones used for truck swap bodies and in shipping. The TSW A 16 is equipped with a conical all-steel bin and a rugged, low-maintenance drive. The milling unit features two horizontal milling beaters and has a passage height of 1,500 mm. For optimum shredding, the milling beaters are fitted with double tines in a V-pattern. These are screw-fitted for easy replacement. As standard, the milling beaters are driven via roller chains. Optionally, the cardan drive can be selected for driving the milling beaters. The standard disk spreader unit features two spreader disks (each with ø 1,000 mm and six adjustable spreader blades). The innovative and patented V-Spread wide spreading unit with two spreader disks arranged in a V-pattern (each with ø 1,100 mm and six adjustable spreader blades) is optionally available. Both spreader units are ideally suited for optimum spreading of all materials (stable manure, compost, lime, etc.). Depending on the spread material, working widths of up to 24 m are possible with the standard disk spreader unit, and of up to 36 m with V-Spread. V-Spread achieved top marks in the DLG test and was awarded the "DLG Anerkannt" (DLG Approved) quality seal. Optional extras include a milling unit with three beaters. The large range of optional extras makes for an ideal adaptation to users’ requirements. The TSW A 16 is parked on 4 optional jack stands.

• Body:
• Easy, unloading without clogging, resulting in a good spread quality through conical all-steel bin
• Side walls are fully welded to the floor for exceptional stability
• Scraper floor with low power demand and no material accumulation in front of the spreader unit through conical body design
• Scraper floor:
• Long durability and high reserves through four strong round-link steel chains with specially hardened ends
• No chain skipping due to large engagement depth of chain links in the chain sprockets (approx. 95 %)
• No drive pin skew through paired chain elongation
• Safe material transport through hot-rolled U-profile flights with good traction
• Bolted flights (U-profile) for easy replacement if worn or damaged through foreign objects – no cutting and welding required
• Optimum flow control and quick emptying, easy reversing and even material feed to the spreader unit through hydraulic scraper floor drive with spur gearbox for excellent longitudinal and lateral distribution
• Rugged scraper floor drive with 60 mm diameter feed shaft
• Low-maintenance through automatic, chain tensioners visible from tractor
• Convenient chain tension readjustment from the front of the spreader
• Easy cleaning and maintenance of the scraper floor through large maintenance hood on the front wall
• Convenient observation of the scraper floor through viewing window
• Spreader unit:
• Universally usable milling unit with dosing wall for all materials
• 1,500 mm passage height allows high throughput
• Very good separation of the spreading material through screwed, highly wear-resistant double tines in a V-pattern for perfect growth
• High throughput rates, short tooling times and low costs at low power requirement through screwed double tines
• Quiet, even operation through spring-loaded chain tensioner
• Flange bearings can be relubricated for long service life
• Low maintenance and wear through rugged, high-load drive
• Exact spreading and high throughput rates through disk spreader unit with two disks (diameter 1,000 mm)
• Extensive protection from overload and breakage through overload protection device for all spreader blades on the spreader disks
• Effective overload protection of gearboxes and shafts through two cam clutches between transfer case and disk gearbox
• Spreader hood:
• Safety, cleanliness and high ease of use through hydraulic folding
• Spreader hood interior is plastic-lined as standard equipment for better distribution of the material onto the disks and reduction of damage from stones
• Lower pendulum flap secured against foreign objects
• A wide range of optional extras allows optimum adaptation to user requirements

• Body:
• Body with twist locks
• Load volume 17 m³
• Bridge dimensions inside 5,900 x 2,050 x 1,320 mm
• Conical all-steel bin
• Rigid steel side wall
• Stable scraper guards of recycled plastic
• Steel floor (4 mm thick), welded to the side walls
• Large cargo space viewing window
• Protective screen at front
• Spreader unit:
• 2-beater milling unit
• 2 horizontal milling beaters with screwed double tines in a V-pattern and made of high-strength, low-wear material
• Cam clutch to protect the milling unit
• Dosing wall
• Passage height 1,500 mm
• Hydraulically foldable spreader hood with foreign object guard on lower section and plastic inner lining
• 2 spreader disks (1,000 mm diameter each, thickness 10 mm)
• 6 adjustable spreader blades per disk, thickness 8 mm
• Reinforced main gearbox in the disk spreader unit
• Each disk gearbox is protected with a separate cam clutch
• Diameter of disk gearbox shaft stub 50 mm
• Hardox-grade spreader blades and guide plates
• Wear plates (screwable)
• Scraper floor:
• Hydraulic drive (reversible) on both sides via 2 spur gearboxes and oil motors
• Manual control valve for continuous setting of the scraper floor speed
• Automatic chain tensioner at the front
• 4 round-link steel chains (14 x 50 mm each, 25 t breaking load per chain)
• Diameter of feed shaft 60 mm
• Screwed flights made of 60 x 30 x 6 mm U-profile, fitted closed at the top
• Drive:
• BERGMANN drive concept
• Walterscheid PTO shaft with overrunning clutch between spreader body and chassis
• Separate protection for milling unit and disk spreader unit
• PTO speed 1,000 rpm
• Lighting:
• Conforming to EU directives
• Protective equipment according to German employers’ liability insurance association

* We reserve the right to make changes to dimensions, weights and technical data. Dimensions and weights do not necessarily correspond to series versions and are not binding.