The GTW 210 is a single-axle transfer trailer with high or low drawbar, a load volume of 21 m³ and a gross weight of 12 or 13 t (road) or 21 or 22 t (field). It has an unloading rate of up to approx. 400 t/h. Two large viewing windows in the front wall provide a good view into the body from the driver’s seat of the tractor. It is designed to minimise the accumulation of crop deposits in the body. The dosing unit can be hydraulically adjusted from the tractor, so that the crop is transported gently and the transfer rate can be conveniently adapted at any time. Partial emptying of the GTW is possible at any time by closing the dosing unit. The feed auger also has a unique design: its flight pitch increases gradually from the back to the front to ensure even emptying over its entire length and minimises grain breakage. Optional extras include the TwinBunker split cargo space system for filling seed drills with fertiliser and seed and a mechanical weighing system for monitoring the transferred amount. The transfer trailer is the logical connection for transport between the continually moving combine harvesters and the transport vehicles waiting by the field. It unites the advantages of low ground disturbance, efficient transport in the field and fast road transport. It maximises combine harvester utilization by allowing its uninterrupted operation, thereby paying a valuable contribution to reducing the time needed for harvest. In addition to grains, the BERGMANN transfer trailers can also be used for any flowable goods – such as corn maize, CCM rape – as well as seed and fertiliser for filling seeders and fertiliser spreaders. With their low centre of gravity, they offer superior driving comfort on both field and road. Their low dead weight results in a high payload.
| Dimensions |
| Length |
7.600 mm |
| Width |
2.550 - 3.000 mm |
| Height |
3.700 mm |
| Body length |
5.000 mm |
| Body width |
2.490 mm |
| Weight |
| Gross weight (road) |
12.000 - 13.000 kg |
| Gross weight (field) |
21.000 kg |
| Net weight with basic equipment |
4.920 kg |
| Coupling |
| High drawbar |
x |
| Permissible tongue load of high drawbar |
2.000 kg |
| Drawbar eye Ø 40 mm |
x |
| Low drawbar (optional) |
x |
| Permissible tongue load of low drawbar (optional) |
3.000 kg |
| Drawbar eye (hitch ring) Ø 50 mm |
x |
| Drawbar eye K80 |
x |
| Drive |
| PTO shaft input speed |
1.000 U/min |
| Body/cargo space |
| Load volume |
21 m³ |
| Load height at side |
3.200 mm |
| Augers |
| Diameter of feed auger |
350 mm |
| Feed auger with increasing pitch |
x |
| Diameter of overload auger |
400 mm |
| Transfer rate of overload auger |
400 t/h |
| Transfer time |
~ 2,5 min |
| Transfer height |
4.800 mm |
| Chassis |
| Single-axle chassis |
x |
| Unsprung axle |
x |
| Number of wheels |
2 |
| Axle track width |
2.100 mm |
| Air brake |
x |
| Transport speed |
30 km/h |
| Transport speed (optional) |
40 km/h |
| Tyres |
| 32" wheel rim |
x |
| Tractor requirements |
| Engine rating (min. - max.) |
88 - 184/120 - 250 kW/PS |
* We reserve the right to make changes to dimensions, weights and technical data. Dimensions and weights do not necessarily correspond to series versions and are not binding.
